Gates's trusted spray foam contractor for commercial roofing, residential insulation, and emergency roof repair across New York.
From SPF roof installation to attic insulation, Lapolla Industries covers every spray foam need in Gates.
Precision leak detection and permanent repair for active roof leaks. We use infrared moisture scanning and visual inspection to trace the leak to its source, then apply a lasting fix — not a band-aid — so it never comes back.
Stop metal roof leaks without replacement. Our elastomeric coating system treats rust, seals every fastener and seam, and creates a continuous waterproof membrane over your entire metal roof — backed by a manufacturer warranty.
Our commercial restoration process preserves your existing roof structure, adds insulation value, and applies a warranted waterproof coating system — saving 50 to 70 percent versus tear-off and replacement on buildings of any size.
Spray foam roofs are built to last, but they do need occasional repair. Our crews fix bird pecks, foot traffic damage, hail impacts, and coating wear — extending the life of your SPF system without a costly full recoat.
Spray foam insulation for crawl space walls, rim joists, and band boards that eliminates moisture, cold floors, and musty odors. Closed-cell foam acts as both insulation and vapor barrier in a single application.
Professional flat roof repair for all membrane types — TPO, EPDM, modified bitumen, built-up, and PVC. We find the actual source of the leak using infrared scanning and fix it permanently, not with another temporary patch.
Extend the life of your existing roof by 15 to 20 years with a silicone coating that seals every seam, reflects solar heat, and handles ponding water without softening or deteriorating. Professional application with manufacturer warranty.
Transform your building with a spray foam roof that insulates, waterproofs, and strengthens in a single application. No tear-off required over most existing substrates. Backed by manufacturer warranties and our own workmanship guarantee.
Attic insulation with spray foam delivers the highest R-value per inch and eliminates the air infiltration that accounts for up to 40 percent of your home energy waste. Our crews install cleanly and efficiently — in and out in one day.
Waterproof your flat or low-slope roof with a spray-applied membrane system that eliminates the seam failures, flashing leaks, and ponding damage that plague conventional roofing. One seamless application. Permanent results.
Full roof replacement with spray polyurethane foam delivers superior insulation, waterproofing, and wind uplift resistance compared to conventional membrane systems. We strip the old roof, inspect the deck, and install a new SPF system built for decades.
Protect your roofing investment with a maintenance program designed for your specific roof type. Our crews document every visit with photos and condition ratings so you always know the exact state of your roof.
When severe weather damages your roof, our storm response crews deploy fast — securing your property, documenting every impact point for your insurance claim, and restoring your roof with quality materials and expert workmanship.
Know the true condition of your roof before problems escalate. Our inspection process covers every component — membrane, flashings, penetrations, drains, and substrate — and delivers a clear, actionable report you can trust.
Roof restoration saves 50 to 70 percent compared to full replacement while delivering equivalent performance. Our SPF and coating systems seal every seam, add insulation value, and provide a reflective finish that cuts cooling costs.
Gates, NY experiences the kind of temperature swings that punish conventional roofing and insulation. Lapolla Industries installs spray polyurethane foam systems engineered to perform in exactly these conditions — continuous insulation with no thermal bridging, no seams, and no weak points where New York weather can exploit gaps in your building envelope.
For Gates businesses watching their utility bills climb, a spray foam roof restoration can reduce cooling costs by 20 to 40 percent while extending roof life by 20 or more years. For homeowners, attic and crawl space insulation with closed-cell SPF eliminates hot spots, cold drafts, and the energy waste that comes with them. Call (866) 605-0362 for a free energy assessment.
Here is what sets Lapolla Industries apart from other contractors in Gates.
Our crews live and work in the communities we serve. We understand local building codes, climate conditions, and the best SPF systems for your specific region.
SPF roofing delivers the highest R-value per inch of any commercial insulation. Our customers typically see 20 to 40 percent reductions in heating and cooling costs after installation.
Every project starts with a no-obligation inspection using infrared moisture scanning and visual assessment. We identify every issue and provide an honest, transparent estimate.
SPF roofing and coating can be applied over existing roof systems without tear-off — no demolition noise, no debris, and no business interruption during installation.
Every project comes backed by manufacturer material warranties plus our own workmanship guarantee. We handle all warranty registration so you are always covered.
Have questions about spray foam in Gates? We have answers.
Silicone roof coatings offer the longest service life for flat and low-slope roofs in Gates. Unlike acrylic coatings, silicone does not re-emulsify in ponding water and maintains its flexibility and UV resistance for 15 to 20 years. We recommend silicone for any Gates roof with drainage challenges or heavy weather exposure.
Yes. Spray foam roofing provides the highest R-value per inch of any commercial roofing insulation — typically R-6.5 per inch. In Gates, this translates to significant cooling and heating savings because the seamless membrane eliminates air infiltration that accounts for up to 40 percent of energy loss in conventional roofs.
Spray foam is one of the best solutions for flat and low-slope roofs in Gates. The seamless application eliminates the seams and joints where conventional flat roof systems fail. SPF also self-levels to eliminate ponding water — one of the biggest causes of flat roof leaks and premature failure.
Most residential attic insulation projects in Gates are completed in a single day. Our crews prep the space, apply the spray foam to the desired thickness, and clean up within 6 to 8 hours. The foam cures within minutes, and you can feel the difference in your home comfort levels the same day.
Yes. Every Gates crew is fully licensed, bonded, and insured for spray foam roofing and insulation work. We carry general liability and workers compensation coverage on every project. You can request proof of insurance before any work begins.
Yes. Every project in Gates begins with a no-obligation roof inspection. Our crews assess the condition of your existing roof, identify problem areas using infrared moisture scanning when needed, and provide a detailed estimate with photos and recommendations. There is never a charge for the initial inspection.
Real reviews from property owners we have served across the country.
"Had a few spots where birds had pecked through the coating on our foam roof. The repair crew patched every spot and applied a fresh topcoat over the entire section. Looks brand new and no more leaks."
"Regular maintenance visits twice a year keep our flat roof in great shape. They clean drains, check seams, inspect all penetrations, and send a detailed report with photos. Good preventive program at a reasonable cost."
"The silicone coating they applied to our metal roof eliminated all the rust spots and sealed every seam and fastener. The reflective finish dropped our cooling costs noticeably. Our building looks ten years newer."
We also provide spray foam roofing and insulation services in these neighboring communities.